The parameters, such as the maximum speed, stride frequency, stride length, split time and reaction time of the first six runners, are analyzed and studied. 通过阅读文献资料、数据对比等方法,对卡尔、刘易斯百米跑的反应时、步长、步频、最大参数等技术参数进行剖析。
Experimental results indicate that bond strength of the adhesive is the best when resin content is sixty to eighty percent and time on reaction is one an. 分析讨论了胶粘剂组成及各成分相互关系,并对增粘树脂含量和反应时间对胶粘剂粘接强度的影响进行了研究。
The effects of preparation condition such as the types and usage of catalyst, reaction time, reaction temperature and molar ratio on the reaction were studied. 对该反应中的催化剂种类和用量、反应时间、反应温度、反应原料选择和配比作了系统的分析,找出了理想的反应条件。
Effects of various reaction parameters on grafting ratio, such as mass of monomer, concentration of initiator, reaction time and reaction temperature were evaluated. 通过单因素实验重点考察了单体用量、引发剂浓度、反应温度和反应时间等对接枝共聚物接枝率的影响。
The temperature and time of reaction, solvent and the constitution of aldehydes have remarkable influences on condensation reaction. 并讨论了反应温度、反应时间、溶剂以及醛的结构对反应产率的影响。
The effects of temperature, time of reaction, amount of catalyst, time of esterifying, time of decompression step by step, etc, on molecular weight of PLA were studied. 以L-乳酸单体为原料,用逐步减压缩聚法合成了相对高分子量的聚乳酸。
Conclusion: The technology can shorten the time of reaction, with higher yield and lower cost. 结论:此方法缩短了时间,提高了产率,降低了成本。
Influence of Time Difference Reaction on Sporting Competence and Its Removal 时差反应对运动能力的影响及消除方法
Unlike DDP, for AAP the relation between C and t was complex, however, the bound amount of Pt decreased after a long time reaction. AAP与DDP不同,各膜蛋白带结合铂量与反应时间的关系呈现复杂的变化,但长时间反应导致铂结合量降低。
The effects of solvent, catalyst, reaction time and reaction temperature on the yield of the product were investigated, and the synthetic reaction conditions were optimized. 讨论了不同的反应介质、催化剂、反应温度和反应时间对产物收率的影响。
The mole ratio of octanol, hydrobromide, octanol and concentrated sulfuric acid were observed, as well as the impact of time on reaction rate. 实验重点考察了正辛醇与氢溴酸的摩尔比、正辛醇与浓硫酸的摩尔、以及时间分别对反应产率的影响。
The effects of catalyst roasting temperature, reaction time, reaction temperature, raw material mole rate and amount of catalyst on the coversion of acrylic acid were studied. 试验考察了催化剂焙烧温度、反应时间、反应温度、原料配比和催化剂用量对丙烯酸转化率的影响。
Many of the chemical catalysts in the chemical industry plays a pivotal role, it can control the reaction time, reaction to improve the efficiency and speed of response. 催化剂在许多化学化工领域中起着举足轻重的作用,它可以控制反应时间、提高反应效率和反应速度。
The effect of modifier type and dosage, pulp density, modification time and reaction temperature on the modification of wollastonite from Hami, Xinjiang was investigated. 以新疆哈密硅灰石为原料,试验研究了改性剂种类、改性剂用量、矿浆浓度、改性时间、反应温度对硅灰石改性的影响。
Meanwhile the influence of the amount of catalyst alkali ethylate and absolute alcohol, the temperature and time of reaction on interesterification was studied. 利用正交试验研究了酯交换法制备卤虾油脂肪酸乙酯的工艺,分析了催化剂用量、反应温度、反应时间、无水乙醇用量等对醇解率的影响。
But hydroxyl radical was produced in a very short time, the degradation effect decreased while the time of reaction prolonged. 但羟基自由基的生成是瞬间完成的,其对胶原蛋白的降解作用随着H2O2和Fe2+反应时间的延长而降低。
The scale inhibition properties are affected by the reaction time, reaction temperature and amount of catalyst. 催化剂一定,反应时间、温度、催化剂用量和药剂添加量也影响阻垢性能。
As the result showing, the add quantity of reagent and the time and reaction temperature were have evidence influence to the capability ultrafine cobalt. 研究结果表明,试剂加入量和加入时间以及反应温度等各种因素对超细钴粉性能均有明显影响。
The influence factor routes as ultrasonic wave intensity, reaction time and reaction temperature on yield of aleuritic acid were investigated. 研究了超声波强度、反应时间、反应温度对紫胶桐酸收率的影响;
Reaction time, reaction temperature were the root factor of crystal growing bigger. 反应时间、反应温度是晶核成长与长大的根本因素;
The effect of the kind of catalyst, the quantity of catalyst, reaction time and reaction temperature were discussed. 通过选择催化剂种类,探讨了催化剂用量、反应时间、反应温度和乙醇-水溶液浓度对收率的影响。
Factors affecting the properties of the resin, such as molecular proportion, temperature and time of reaction etc. 探讨了摩尔配比、反应温度和反应时间等影响树脂性能的因素。
The effects of reaction time and reaction temperature on corrosion rate of JJ-9 alkalinity reducing agent were examined. 分析了反应时间和反应温度对降碱剂JJ-9腐蚀速率的影响;
The influence of reaction time, reaction temperature, volume percent of the hydrogen peroxide, ratio of the hydrogen peroxide and acetic acid, rate of desulfurization and accepting was examed. 按正交设计方法考察双氧水的体积分数、双氧水与乙酸的体积比、反应温度及反应时间对脱硫率和收率的影响。
Relations between substituting degree, brei viscosity and monomer concentration, chloroacetic acid concentration, reaction time and reaction temperature are concluded from experiment results, and pH value, change rules of conductivity of the reaction system are studied. 由实验结果得出了取代度、糊液粘度与单体浓度、氯乙酸浓度、反应时间、反应温度的关系;对反应体系的pH值、电导率变化规律进行了研究;
The effects of variety and amounts of the catalyst, the proportion of maleic anhydride to catalyst, the reaction temperature and the residence time of reaction mixture on the percentage of maleic anhydride grafting were investigated. 在研制过程中考察了引发剂的种类和用量、马来酸酐与引发剂的比例,温度以及反应物停留时间对接枝率及马来酸酐转化率的影响。
Effects of pH value of reaction medium, catalyzer, acidizing time and reaction temperature on the size, distribution of particle size and structure of microcapsules were discussed. 讨论了反应介质的pH值、催化剂、酸化时间和反应温度对微胶囊粒径及其分布、微胶囊结构的影响。
These was a great effect of C/ Ti on the reaction time and reaction temperature, but was little effect on the reaction start temperature. C/Ti对反应温度和反应时间有很大的影响,但对反应起始温度影响很小。
This thesis, aims to build layout of construction scene in freeway construction engineering and real time reaction and browse with users, lucubrates the application in engineering modeling and simulation. 本文以构建高速公路施工中的场景虚拟布置和施工过程模拟,实现与用户的实时动态交互为目标,对虚拟现实技术在工程建模和仿真中的应用进行了深入的研究。